Bathtub Refinishing in Jacksonville, FL
Glover Refinishing provides professional bathtub refinishing — also called tub resurfacing or reglazing — throughout Jacksonville and the surrounding communities. We evaluate each surface before we begin and apply a high-end polyurethane finish after the surface has been properly prepared.
Our Bathtub Refinishing Process
Every refinishing project starts with understanding the condition of the existing surface. No two tubs are exactly alike, which is why we take the time to inspect each one before beginning the refinishing process.
Surface Assessment
We inspect the bathtub for chips, cracks, stains, previous refinishing work, and overall condition to determine whether it's a good candidate for refinishing.
Surface Preparation
The tub is thoroughly cleaned and prepared to remove contaminants that could interfere with adhesion.
Proper Surface Etching
Surface preparation includes etching when appropriate. This step helps create the mechanical bond between the existing surface and the new finish. After more than 35 years in the industry, we've seen firsthand how important proper preparation is to the overall performance of a refinishing job.
Primer Application
After etching, we apply a primer coat before any finish is applied. Primer delivers superior adhesion — and it's a step most refinishers skip. We don't.
High-End Polyurethane Finish Application
Once the surface has been properly prepared, we apply a durable, high-end polyurethane finish designed specifically for bathtub refinishing.
Cure Time
After the finish has cured according to product requirements, your bathtub is ready to return to normal use. We'll provide care instructions to help you protect your newly refinished surface.
Why We Use Polyurethane Instead of Epoxy or Acrylic Urethane (Poly)
Not every refinishing material performs the same.
For bathtub refinishing, we use high-end polyurethane because it's designed to provide excellent durability, flexibility, and long-term performance when applied over a properly prepared surface. It also stands up well to everyday use, changing temperatures, and normal household cleaning products. Some refinishers use acrylic urethane — sometimes marketed simply as "poly" — because it costs less. It's a different material, and it performs differently over time. We use true polyurethane because it gives every surface the strongest possible finish.
The material is only part of the process, though. A quality finish depends just as much on careful preparation as it does on the coating itself. That's why we focus on both — using proven materials and taking the time to prepare every qualifying surface correctly.
Tub Types We Work With
Different tub materials require different preparation approaches. We have experience evaluating and refinishing the most common bathtub types found in Jacksonville-area homes.
Older fixtures deserve a careful approach. We restore clawfoot tubs, cast iron fixtures, and select antique sinks while preserving the character that makes these pieces worth keeping.
Fiberglass Bathtubs
Fiberglass tubs are among the most refinished surfaces we encounter. They respond well to proper preparation and polyurethane application — and they're also among the most common candidates for refinishing repairs when an earlier job didn't hold.
Porcelain Tubs
Porcelain surfaces require careful surface evaluation before refinishing begins. Chips, cracks, and worn areas are assessed as part of the process to confirm the surface is suitable.
Cast Iron Tubs
Cast iron tubs — including clawfoot and antique styles — are durable substrates that often respond well to refinishing when properly prepared. We also refinish antique cast iron tubs and sinks through our Antique Refinishing service.
Acrylic Tubs
Acrylic surfaces are evaluated for condition and coating compatibility before we begin. The preparation process accounts for the surface's characteristics to support proper adhesion.
Bathtub Refinishing vs. Replacement
For many worn or dated tubs, refinishing may offer a practical alternative to full replacement — depending on the surface and its condition.
Replacement involves demolition, disposal, new fixtures, potential plumbing work, and installation. Refinishing works with what's already there. The cost difference is meaningful, and when the surface is properly prepared and finished, the result can hold for years with appropriate care.
Refinishing isn't the right answer for every situation. If a surface is too damaged or otherwise not a suitable candidate, we'll tell you that at the estimate stage rather than after we've started the job.
Why the Finish Material Matters
We use a high-end polyurethane finish for bathtub refinishing. It's selected for its performance characteristics in bathroom environments — resistance to heat, moisture, and the cleaning products most households use regularly.
Finish selection matters, and so does how the finish is applied. The preparation steps preceding application — including etching and primer — affect how well any coating bonds to the existing surface. We don't separate the two — material and preparation are both part of what produces a result that holds.
Is Bathtub Refinishing Right for You?
If you're deciding between refinishing and replacement, the condition of your bathtub is the best place to start. Many worn, stained, or outdated tubs can be restored successfully, while others may be better suited for replacement.
We'll take the time to inspect your bathtub, answer your questions, and explain your options so you can make an informed decision. Our goal is never to sell you a service you don't need — it's to recommend the solution that's right for your project.
Common Questions About Bathtub Refinishing in Jacksonville
What is the difference between bathtub refinishing and bathtub reglazing?
Nothing — they describe the same process. Bathtub refinishing and bathtub reglazing both refer to restoring an existing tub surface rather than replacing it. Some companies use one term, some use the other, and some say resurfacing. At Glover Refinishing, we use the word refinishing because it most accurately describes what we do: applying a high-end polyurethane coating to a properly prepared surface. What matters more than the label is the process — whether the surface is etched, primed, and finished with the right material. That is where most refinishing jobs either hold up or fall apart.
How much does bathtub refinishing cost in Jacksonville, FL?
The cost depends on the tub type, its current condition, and what preparation the surface requires. We provide free estimates — call 904-748-0666 or fill out the contact form and we'll give you a straight number based on what we're actually working with.
How long does bathtub refinishing take?
Most bathtub refinishing jobs can be completed in a single visit. The total time on-site depends on the surface condition and the preparation required. [Confirm typical project duration range with Arthur before publishing.]
How long does a refinished bathtub last?
Longevity depends on the surface, how it was prepared, the finish used, and how the tub is maintained after the job is complete. We use a high-end polyurethane finish applied after proper etching and primer — both factors contribute to how the finish holds over time. We don't quote a guaranteed lifespan because it depends on conditions we can't fully control after we leave.
Can a damaged or previously refinished tub be refinished again?
It depends on the condition of the existing surface. Previously refinished tubs and surfaces with chips or wear can sometimes be refinished again — but the surface needs to be evaluated first. If you have a tub showing peeling or adhesion problems from an earlier job, our Repairs service may be relevant.
Should I refinish or replace my bathtub?
That depends on the surface and what condition it's in. For many worn or dated tubs, refinishing is a practical option. For surfaces that are structurally compromised or otherwise poor candidates for refinishing, replacement may make more sense. A free estimate gives us a chance to evaluate the surface and give you an honest recommendation.
Do you refinish bathtubs near me in Jacksonville, FL?
We serve Jacksonville and surrounding communities including Orange Park, Fleming Island, Ponte Vedra Beach, Jacksonville Beach, and Fernandina Beach — within approximately 50 miles of Jacksonville. Call 904-748-0666 to confirm availability for your location.
Request a Free Bathtub Refinishing Estimate
If your tub is worn, stained, chipped, or carrying a finish from a previous job that didn't hold — we're glad to take a look. Call 904-748-0666 or fill out the form below and we'll follow up to discuss your surface and what refinishing can do for it.